Mooer US Classic Deluxe 006 Micro Preamp
Mooer Micro Preamp 006 is a Fender blues deluxe type preamp pedal. Reproduces FENDER's unique bell tone to wild drive sound. It features a bold and clear sound with vintage-like bass and a firm midrange.
The Mooer Micro Preamp series is a mini-sized housing that combines the sounds of various vacuum tube amplifiers. It is a digital preamp pedal recorded in the body. Intelligent Amplifier Modeling technology captures the sound, dynamics, and response of a real tube amp.
Control
・VOL: Adjust the volume.
・GAIN: Adjust the strength of distortion.
・TRE: Adjusts the output of high frequencies.
・MID: Adjusts the way the midrange comes out.
・BASS: Adjusts the appearance of low frequencies.
・CH/CAB: Switch channels by pushing. Also, press and hold for 2 seconds to turn the cabinet simulator ON/OFF.
・Foot switch: Equipped with two operating modes. Press and hold the footswitch for 2 seconds to switch between operating modes.
Active/Bypass: Press the footswitch to toggle the preamp between active and bypass. You can use it like a normal effector.
Channel switching: Switch between two channels by pressing the footswitch. Effective when used as an always-on preamplifier.
・GAIN: Adjust the strength of distortion.
・TRE: Adjusts the output of high frequencies.
・MID: Adjusts the way the midrange comes out.
・BASS: Adjusts the appearance of low frequencies.
・CH/CAB: Switch channels by pushing. Also, press and hold for 2 seconds to turn the cabinet simulator ON/OFF.
・Foot switch: Equipped with two operating modes. Press and hold the footswitch for 2 seconds to switch between operating modes.
Active/Bypass: Press the footswitch to toggle the preamp between active and bypass. You can use it like a normal effector.
Channel switching: Switch between two channels by pressing the footswitch. Effective when used as an always-on preamplifier.
Connection
/DCIN: Connect the center negative DC9V adapter. Current consumption is 300mA.
・INPUT: Connect the instrument cable. When using it as a preamp, it is also effective to connect a distortion effector etc. to the front stage.
・OUTPUT: Connect the amplifier or PA side cable. Connect to amplifier input, effect return, PA, etc. It is effective to connect spatial effects etc. to the latter stage.
・INPUT: Connect the instrument cable. When using it as a preamp, it is also effective to connect a distortion effector etc. to the front stage.
・OUTPUT: Connect the amplifier or PA side cable. Connect to amplifier input, effect return, PA, etc. It is effective to connect spatial effects etc. to the latter stage.
Specification
| Modes | Delay and reverb effects with tap tempo functionality. |
| Input | 1/4” mono audio jack.（Impedance: 1 meg Ohms） |
| Output | 1/4” mono audio jack（Impedance: 100 Ohms |
| Power Requirements | AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.） |
| Current Draw | 300mA |
| Dimensions | 93.5mm(D) x 42mm(W) x 52mm(H) |
| Weight | 160g |
